ATX
COMPANY BUSINESS INVENTORY
Material

Nickel Alloy

Alloy materials for stainless steel and various special steels include coins, magnetic alloys, nickel plating,
It is a metal used in a wide variety of applications, such as hydrogenation catalysts.
Nickel Alloy

에이티엑스(주)

www.atx.kr

대표전화 문의

888@atx.kr

담당자
Properties of Nickel
  • Nickel is not corroded in the atmosphere but it is highly corrosive in air containing sulfur dioxide.
  • It is strong against distilled water, fresh water and seawater.
  • The corrosion resistance of neutral and alkaline salt liquids is also good, but it is about 0.127mm / year.
  • It is eroded into an aqueous solution of oxidizing salts (Ferric chloride, Cupric chloride, Mercuric chloride, Hypochlorite, etc.)
  • Sulfuric acid is not eroded, but corrosion is promoted by the presence of oxidants such as air, heavy chromates.
  • In hydrochloric acid it changes depend on the amount and concentration of air incorporated.
  • Corrosion against organic acids is strong.
  • It slowly oxidizes in air above 500 ° C, but increases in oxidation above 750 ° C.

Nickel

Composition of Nickel
Alloy Name
(UNS No) 		Main Chemical Composition Density(g/cm) Mechanical Integrity (Room Temperature) Properties
Condition Tensile Srength1000Psi(Mpa) Yield Strength1000PSI(Mpa)at 0.2% offset Elongation Brinell (ROCK WELL)
NICKEL 200
(NO2200) 		Ni99.6 C 0.15 MAX 8.89 " 55-80
(380-550) 		15-30
(100-210) 		90-120 Pure nickel has good mechanical properties and excellent corrosion resistance
NICKEL 201
(NO2201) 		Ni 99.6 C 0.02 MAX 8.89 " 55-80
(380-550) 		15-30
(100-210) 		90-120 Nickel has the same properties as Nickel200 but low carbon makes it suitable for applications over 300℃.
MONEL 400
(NO4400) 		Ni 66.5 Cu 31.5 8.83 Annealed 70-90
(480-620) 		25-50
(170-340) 		110-149 It is widely used because it has excellent strength,weldability,corrosion.
MONEL K-500
(NO5500) 		Ni 65.5 Cu 29.1
Al 2.7, Ti 0.6 		8.46 " 140-190
(970-1310) 		110-150
(760-1030) 		265-346 Due to the same properties as Monel 400, as the age hardening alloy, high strength is obtained.
HASTELLOY B-2
(NO10665) 		NI BAL, Cr 1.0
mO28, mN 1.0
Fe2.0, Si 0.10
Co 1.0, C 0.01 		9.22 Annealed 132.5
-914 		57.5
-396 		228 (B-98) Alloy which improves the corrosion resistance of welding heat affected zone.
HASTELLOY
C-276
(NO4405) 		NiBAL, W4
Mo28, Co 2.5
Cr 15.5, Mn 1.0
Fe 5.5, C 0.01 		8.89 " 114.9
-792 		51.6
-356 		184(B-90) "
HASTELLOY
C-4
(NO6455) 		NiBAL, Co 2.0
Cr 16 Mn 1.0
Mo 15.5, Ti 0.7
Fe 3.0, C 0.01 		8.64 " 116.2
-801 		61
-421 		194 (B-92) Alloy which improved the high temperature stability.
HASTELLOY
C-22
(NO6022) 		NiBAL, Cr 20-22.5
Mo 12.5-14.5
W 2.5-3.5
Co 2.5, C 0.01 		8.69 " 116.3
-802 		58.5
-403 		184(B-90) Excellent corrosion resistance and local corrosion resistance in oxidizing environment than c-276.
HASTELLOY G
(NO06007) 		NiBAL, Co 2.5
Cr22 Cb+Ta2
Fe 19.5, Cu2
Mo 6,5, Mn 1.5
W1, Si 1 		8.3 " 102
-703 		46.2
-319 		161 (B-84) Excellent corrosion resistance to high temperature sulfuric acid and phosphoric acid.
HASTELLOY
G-3
(NO6985) 		NiBAL, Co 5
Cr21-23.5
Cu 1.5-2.5
Fe18-21, W1.5
Mo 6-8, Si 1
Mn 1, C 0.015 		8.3 " 99-683 44-303 158(B-83) "
HASTELLOY
G-30
(NO6030) 		NiBAL, Mo 5.0
Cr 29.5, W2.5
Fe 15, Mn 2.0
Ca 1.7, Co 5.0
Si 1.0 		8.22 " 100-690 47-324 176(B-88) Excellent corrosion resistance to industrial phosphoric acid and strong oxidizing acid.
HASTELLOY X
(NO6002) 		NiBAL Co 1.5
Cr 22, Si 1
Fe 18.5, Mn 1
Co 1, AI 0.5
Mo 9, W 0.6
Ti, 0.15 		8.22 " 109.5-755 55.9-385 194(B-92) Alloy which high temperature strength and excellent corrosion resistance.
INCONEL 600
(NO6600) 		Ni 79, Cr 15.5
Fe 8 		8.42 Annealed 80-100
(550-690) 		30-50
(210-340) 		120-170 Alloy of high Nickel and high Chromium has excellent corrosion resistance in a oxidizing and reducing atmosphere and high temperature.
INCONEL 601
(NO6601) 		Ni 60.5, Cr 23
Fe 14, AI 1.4 		8.06 " 80-115
(550-790) 		30-60
(210-340) 		110-150 High temperature and excellent oxidation resistance.
INCONEL 617
(NO6617) 		Ni 52, Mo 9
Cr 22, Al 1.2
Co 12.5 		8.36 " 110-760 51-350 173 High temperature and excellent oxidation resistance.
INCONEL 625
(NO6625) 		Ni 61, Cr 21.5
Mo9
Nb+Ta 3.6 		8.44 " 80-115
(550-790) 		80-115
(550-790) 		180 Alloy which High strength and toughness from Cryogenic to 980℃, Highly corrosion-resistant with oxidation-resistant fatigue strength.
INCONEL 690
(NO6690) 		Ni 60, Cr 30
Fe 9.5 		8.19 " 80-115
(550-790) 		80-115
(550-790) 		382 Excellent corrosion resistance to oxidizing chemical agent and gases containing sulfur.
INCONEL x-750
(NO7750) 		Ni 73, Ti 2.5
Cr 15.5, Al 0.7
Fe7Nb+Ta 1.0 		8.25 " 80-115
(550-790) 		80-115
(550-790) 		300-390 As a age hardening alloy, excellent strength from -250 ℃ to 700 ℃, can be welded in aging condition and excellent oxidation resistance up to 980 ℃.
INCOLOY 800
(NO8800) 		Ni 32.5, Fe 46
Cr 21 		7.95 Annealed 80-115
(550-790) 		80-115
(550-790) 		120-184 Excellent in high temperature strength.
INCOLOY 800TH
(NO8811) 		Ni 32.5, C 0.08
Fe 46, Cr 21
Al+Ta 1.0 		7.95 " 80-115
(550-790) 		80-115
(550-790) 		100-184 Excellent in high temperature strength.
INCOLOY 825
(NO8825) 		Ni 42, Cu 2.2
Fe 30, Cr 21.5
Mo 3 		8.14 " 80-115
(550-790) 		80-115
(550-790) 		100-184 Excellent corrosion resistance over a wide range, particularly good for intergranular corrosion and reduced acidity.